Suarez Precision 5 Pound Connector
Our new 5 pound connector is based on the factory connector. We manufactured it to exacting tolerances and polished it for the smoothest function possible. This gives you a slightly shorter and crisper trigger break with a positive reset. When combined in kit form with our triggers, it is a great carry trigger for Glocks.
Installation: Check the outward bend angle of the connector once installed. This is done by sliding a piece of paper between the connector and the top portion of the trigger mechanism housing. The paper should slide through with a little resistance. If the paper does not slide through then the connector needs to removed and bent out slightly.
If the installed connector fits too far inwards, the trigger may not reset. This is common on some Glocks. The connectors are modeled after the OEM connectors, but there are slight variances in the trigger mechanism housings which can affect the final connector angles. Please use the technique above to insure your connector bend angle is correct. If it is not, it can be manually bent outward from the trigger housing to achieve the correct fit.