SUAREZ NSA2 - NARROW SLIDE ADAPTER FOR TRIJICON RMR

SUAREZ NSA2 - NARROW SLIDE ADAPTER FOR TRIJICON RMR

The improved NSA2 Mount is designed to mount a Trijicon RMR to slides that would normally be too narrow to accept that red dot unit.  Time and time again, we have seen red dot systems intended for narrow slides fail due to various weaknesses in their construction and design.  Wouldn't it be great - we thought - if we could mount a Trijicon RMR on a Glock 43, a 1911, or a CZ75.  No longer wanting to compromise on less robust optics, we designed the NSA Mount.  "NSA" refers to "Narrow Slide Adapter", and it can be milled and installed on most narrow pistol slides.  Then the RMR is installed on the mount itself.  Notable with our unit is that you retain slide mounted front and rear sights and those sights, not being mounted to the adapter plate, can be independently zeroed from the red dot.  This is a crucial attribute if you truly want to cowitness iron sights with the red dot.  The NSA2 includes recoil bosses to fit and hold your RMR or Holosun 507C/508T in place, and a new whole pattern that will lend to use of our upcoming slide saddle for the NSA2 compatible slides.

The NSA Mount installation requires a gunsmith.

INCLUDED are milling plans and dimensions so you or your gunsmith can cut your narrow slide for the Trijicon RMR.

All necessary screws to mount the NSA2 are included.

DO NOT OVER-TORQUE!! IMPROPER INSTALLATION OR USE OF NSA WILL VOID WARRANTY.

PROPER TORQUE TO MOUNT NSA PLATE TO SLIDE: 13-15 IN/LBS

PROPER TORQUE TO MOUNT OPTIC TO NSA PLATE IS: 8-10 IN/LBS

RMRcc NOT COMPATIBLE WITH THIS PRODUCT!

** FOR PREVIOUS VERSION SLIDES, THE NSA2 MAY BE USED IN PLACE OF ORIGINAL NSA, AS 3 SCREWS WILL BE SUFFICIENT TO MAINTAIN THE PLATES POSITION WITH BLUE LOCTITE, BUT MACHINING OF FORWARD LEFT HOLE IS RECOMMENDED